Qidi Tech I Desktop 3D Printer Review

Qidi Tech I 3d printer is one of 3D printer options on the market that can be chosen to fulfill your needs of printing 3D objects. For those who plan to spend less than $1000 for purchasing 3 printer, this product can become a great option. This product is shipped from China. It is yes a far location to shop online but the customer support is great. You will amaze how fast the shipping and the product is sent to your house.

The Customer Support

When you have gotten the 3D printer sent to your address earlier, you will need to ask the manufacturer the software copy for the printer. You can send email to the customer support and then the software copy will be sent within a few hour. The email will consist of information about how to download the original software of the MakerBot Replicator. It is a recommended software that should be used to make the printer operation easier.

Unbox the 3D Printer

Based on some Qidi Technology I Review, the printer comes with well-packed and neat box that protects the printer well. Inside the box, there are a couple of filament spools; the Silver ABS and Green PLA. Besides, the hardware of the printer also come with the needed parts as well as small toolkit. You can also find a manual book inside the box. The instructions are very clear to follow so you can build the 3D printer in less than 3 hours. Take the bottom plate off if you want to switch the power over 115 volts as required.

The Basics of the QIDI 3D Printer

The QIDI 3D printer comes in sturdy QIDI tech construction with metal frame so it weighs more than 21 kg. The device dimension is 18.3 x 12.6 x 14.76 inches and it prints objects in maximal measurement; 9 x 5.9 x 5.9 inches with overall volume 313 cubic inches. Meanwhile, the plate is made from aeronautic grade aluminum that can prevent from 120 Fahrenheit of warping.


The full features that come inside the box are such as;

  • ABS filament; 1 roll

  • PLA filament; 1 roll

  • Spool holders; 2 filaments

  • Painter’s tape; 1 roll

  • Power cable

  • 1 USB cable

  • 4GB SD card

  • Filament tubes

  • Wiring harnesses

  • A tool box consisting tools and fasterners

  • Manual instructions

Full Specifications

  • Fused Deposition Modeling (FDM) system

  • Building size: 225 x 145 x 150mm

  • Nozzle diameter: 0.4mm

  • Layer resolution: 100 micron

  • Printing material: ABS/ PLA

  • Available heated bed

  • USB cable and SD card for connectivity

  • Makerware/ Replicator G for software support

  • Input voltage: 110V / 230V

  • The Size of Printer Machine: 465 x 320 x 375mm

Before operating the printer, it is recommended to read the manual instruction as well as kinds of QIDI tech 1 3d printer Review to know this product well.

This 3D printer comes with dual extruders that can make printing results in multi-color and layer of thicknesses. The thickness is adjustable from 0.1 – 0.3 millimeters. You can make function the machine by operating it through SD car or PC tether. You can print 3D objects with less failure about the quality, even though you may need some recalibrating process occasionally between the buildings.

The Printing Quality of Qidi Technology I 3D Printer

Qidi Tech I 3d Printer

When the printer has been assembled completely, then you can start operating the printer. Read the user manual well to make the operation easier. Remember that you can’t run all of programs of the printer at once. So if you have installed the software of MakerBot, Python software, and Replicator G software, you can’t run them together or the PC will not properly read the connection. If you get such problem, you should check whether your computer is running other software. Close the unnecessary programs and then you can see your computer recognizing the printer in about 60 seconds. Then you can run the printer well.

Choosing this Qidi Tech 1 3D printer will become a great idea since you spend less than $1000 for all of the features. The design of the printer will only need 37 minutes to complete and the result is amazing with the fine details. When you setup the printer, make sure that you have mounted the dual extruder to the cradle. Then mount the filament and the holders along with the plexi-glass walls, top and door. You can so the assembly process by following the instructions inside the SD card.

qidi technology i 3d printer

According to some QIDI tech 1 review, there are some things to consider when you use the printer, such as;

  • When you operate the printer, make sure you wait for the process until it finishes. Don’t leave the work on the printing bed overnight since the printed objects will be very stick when the bed has been too cool. It will be difficult for you to take off the objects. Besides, it will also be difficult to clean the melted tape from the printing bed.

  • If you are going to use rafts, make sure that the parts have span that needs minimal support so it will not fail to work. Make sure it will balance the printer.

  • To clean the supports and rafts, you will need small file set such as exacto knife.

  • PLA and ABS tapes work well.

  • To make the 3D printing results shiny and smooth, it is recommended to put the printed objects in a ziplock with a little acetone. It will make nice finishing into your 3D objects.

  • Cut the guide tubes about 2.5 inches if they rub the dome cover of the printer.

When the 3D printer has been assembled well with all the parts, then you can try to print out 3D objects in any shape you like. Make sure the dimension of the objects have been fit to the maximal measurement of the Qidi Tech I 3d printer printing bed.

Watch A Good Video of QIDI Tech 1 3D Printer Review Below

Summary Qidi Tech I Desktop 3d Printer
  • Design
  • Build Quality
  • Technology
  • Price


Choosing this 3D printer will become a great idea since you spend less than $1000 for all of the features it has.

Add Comment